| Customization: | Available |
|---|---|
| Type: | Grinding Equipment |
| Motor Type: | AC Motor |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Ball mill is a key equipment for crushing materials after they are crushed. It can grind various ores and other grindable materials dry or wet.
Ball mills are widely used in cement, silicate products, new building materials, refractory materials, fertilizers, black and non-ferrous metal beneficiation, glass and ceramics and other production industries.
The structure of the ball mill is mainly composed of the feeding part, the discharging part, the rotating part, the transmission part (reducer, small transmission gear, motor, electronic control) and other parts. Among them, the hollow shaft is made of cast steel, the lining is removable, the rotating large gear is made of casting hobbing, and the cylinder is inlaid with a wear-resistant lining.
The traditional ball mill uses sliding bearings, and the friction coefficient of the main bearing is 0.008, which causes a high temperature rise during operation and rapid aging of the lubricating oil, so the lubricating oil must be replaced every six months. In comparison, the new energy-saving ball mill uses rolling bearings, and the friction coefficient is only 0.0025, which is only 1/3.2 of the friction coefficient of sliding bearings. This greatly reduces the power consumption required to overcome frictional resistance, which is only 1/3.2 of that of a sliding bearing ball mill. The new ball mill uses grease lubrication, which is added once a week or month and replaced once a year, saving more than 80% of lubricating oil. In addition, the main bearing does not need cooling water, which can save tens of thousands of tons of water each year. The elimination of the lubricating oil station also reduces the power consumption of the oil station.
1. Wide Range of Materials
Can process more than 100 different mineral raw materials and can show excellent grinding effects, whether dry or wet grinding.
2. Large Crushing Ratio
Compared with other grinding equipment, it can grind materials to finer particle sizes.
3. Strong Production Capacity
By adjusting the discharge port, materials with different fineness requirements can be ground to meet different production needs.
4. Easy Maintenance
Made of wear-resistant materials, with a long service life and a relatively simple maintenance process, it saves enterprises a lot of time and money.
The grinding medium and material are brought to a certain height by the rotating cylinder, so that they produce extrusion, impact and stripping between each other to grind the material. The material is loaded into the cylinder through the hollow shaft at the feed end of the mill. When the cylinder rotates, the grinding body is attached to the cylinder lining due to inertia and centrifugal force and is carried away by the cylinder. After reaching a certain height, it is thrown down due to gravity, and the falling grinding body crushes the material in the cylinder. After the material is coarsely ground in the first bin, it enters the second bin through a single-layer partition plate for further grinding, and the powder is discharged through the discharge grate plate.
| Ball Mill Technical Parameters | |||||||
| Model | Rotary Speed (r/min) |
Ball Load (t) |
Input Size(mm) | Output Size(mm) | Capacity (t/h) |
Power (kw) |
Weight |
| φ900x1800 | 36-38 | 1.5 | <20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.85 |
| φ900x3000 | 36 | 2.7 | <20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.98 |
| φ1200x2400 | 36 | 3 | <25 | 0.075-0.6 | 1.5-4.8 | 30 | 13.6 |
| φ1200×3000 | 36 | 3.5 | <25 | 0.074-0.4 | 1.6-5 | 37 | 14.3 |
| φ1200x4500 | 32.4 | 5 | <25 | 0.074-0.4 | 1.6-5.8 | 55 | 15.6 |
| φ1500x3000 | 29.7 | 7.5 | <25 | 0.074-0.4 | 45327 | 75 | 19.5 |
| φ1500 x4500 | 27 | 11 | <25 | 0.074-0.4 | 3-6 | 110 | 22 |
| φ1500x5700 | 28 | 12 | <25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
| φ1830x3000 | 25.4 | 11 | <25 | 0.074-0.4 | 4-10 | 130 | 34.5 |
| φ1830×4500 | 25.4 | 15 | <25 | 0.074-0.4 | 4.5-12 | 155 | 38 |
| φ1830×6400 | 24.1 | 21 | <25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
| φ1830x7000 | 24.1 | 23 | <25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
| φ2100x3000 | 23.7 | 15 | <25 | 0.074-0.4 | 6.5-36 | 155 | 45 |
| φ2100 x4500 | 23.7 | 24 | <25 | 0.074-0.4 | 15919 | 245 | 56 |
| φ2100×7000 | 23.7 | 26 | <25 | 0.074-0.4 | 12-48 | 280 | 59.5 |
| φ2200×4500 | 21.5 | 27 | <25 | 0.074-0.4 | 16681 | 280 | 54.5 |
| φ2200x6500 | 21.7 | 35 | <25 | 0.074-0.4 | 14-26 | 380 | 62.5 |
| φ2200x7000 | 21.7 | 35 | <25 | 0.074-0.4 | 15-28 | 380 | 64.8 |
| φ2200x7500 | 21.7 | 35 | <25 | 0.074-0.4 | 15-30 | 380 | 58 |
| φ2400x3000 | 21 | 23 | <25 | 0.074-0.4 | 18445 | 245 | 72 |
| φ2400x4500 | 21 | 30 | <25 | 0.074-0.4 | 8.5-60 | 320 | 95 |
| φ2700×4000 | 20.7 | 40 | <25 | 0.074-0.4 | 22-80 | 380 | 102 |
| φ2700x4500 | 20.7 | 48 | <25 | 0.074-0.4 | 26-90 | 480 | 149 |
| φ3200x4500 | 18 | 65 | <25 | 0.074-0.4 | Customizable | 630 | 169 |
| φ3600x4500 | 17 | 90 | <25 | 0.074-0,4 | Customizable | 850 | 198 |
| φ3600x6000 | 17 | 110 | <25 | 0.074-0.4 | Customizable | 1250 | 260 |
| φ3600×8500 | 18 | 131 | <25 | 0.074-0.4 | 45.8-256 | 1800 | 230 |
| φ4000x5000 | 16.9 | 121 | <25 | 0.074-0.4 | 45-208 | 1500 | 242 |
| φ4000x6000 | 16.9 | 146 | <25 | 0.074-0.4 | 65-248 | 1600 | 249 |
| φ4000x6700 | 16.9 | 149 | <25 | 0.074-0.4 | 75-252 | 1800 | 280 |
| φ4500×6400 | 15.6 | 172 | <25 | 0.074-0,4 | 84-306 | 2000 | 320 |
| φ5030×6400 | 14.4 | 216 | <25 | 0.074-0.4 | 98-386 | 2500 | 403 |
| φ5030x8300 | 14.4 | 266 | <25 | 0.074-0.4 | 118-500 | 3300 | 525 |
| φ5500×8500 | 13.8 | 338 | <25 | 0.074-0.4 | 148-615 | 4500 | 525 |
Henan ANSHUN Machinery Equipment Co., Ltd. is a modern enterprise that integrates research and development, production, sales, and service of mining crushing, construction sand and gravel aggregate, and crushing and sand making. As one of the first companies to pass the ISO9001 quality certification system and an EU CE-certified company, the company produces and sells products to Southeast Asia, Central Asia, Africa, the Middle East, and other countries and regions. The perfect after-sales service management system has made the company′s products recognized and praised by the industry. The ANSHUN brand is well-known at home and abroad and has become a shining pearl in the mining machinery manufacturing industry.
Support:
We can not only provide the good machines, but also wholeheartedly provide the comprehensive for our clients. The series of professional technology service will make you have an excellent product experience.
After-sales service support :
After we signed the purchase contract and have a certain reputation guarantee, we will contact the professional group that responsible for ship bookings, commodity inspection, commercial invoices, packing list, insurance policy and so on, in order to provide you the perfect goods trading services, until the product you purchased properly to your hands.
We will send a professional and high levels installation engineer team at the same time the product properly to the destination, in order to supply you a full range of products installation services. For some typical problems, our rigorous installed engineers also will do some certain installation debugging training, etc.
Technological support :
ANSHUN Machinery has been largely adopting new technologies, new techniques and high-tech equipment. And ANSHUN Machinery also has strict and effective quality control system. We have obtained ISO9001:2000, TUV and CEquality system certificate.
){kind=link}